Electro-Lifting-Magnet 536
Type 536 Electro-Lifting-Magnet 536 can be used for handling or automated transport and handling of steel products. Threaded holes are provided on the back for attaching the magnets. Various attachment points are also available.
The magnet body is made of special steel with high magnetic conductivity. The winding is made of highly insulated copper wire and is moulded into the magnet housing, completely protected against vibration and moisture. The electrical connection is available in different versions depending on customer requirements. The direct current supply can be provided by our rectifier or, if controlled via PLC, in fully automated operation with our electronic pole-reversal control unit.
If the electric lifting magnet is not used exclusively in the fused area, a backup battery and an automatic warning device for signalling the power failure are required in accordance with EN13155. This ensures that the parts to be transported can continue to be held safely and emergency measures can be initiated. After switching off or in the event of a power failure, the parts are released immediately or with a slight delay, depending on the material and weight.
Hold & transport - Features
Adhesive force
Standard
Standard
| Hold & transport - Features | |
|---|---|
| Einsatzgebiete | Crane transport |
| Control system | Pole reversal control unit |
| Adhesive force | Standard |
| Holding force control | Multi-stage adhesive forces |
| Magnet design | Electro-magnet |
| Areas of application | Crane systems |
| Ausführungsoptionen | Anchor Points, Suspension-Brackets, Electrical Connector Plug |
Downloads
Detailierte Angaben zu den Hold & transport - Features finden Sie in den Datenblättern.Um den Download zu starten, wählen Sie bitte eine Datei aus. Electric holding solenoid 535, 536
The Highlights
SERIES 536
- Magnet housing fully protected against vibration and moisture
- Pole reversal control units, which serve as a controllable direct current supply and as a pole reversal unit
- Control units for operating the pole-reversal control units and rectifiers
Technical data
SERIES 536
1
| Type | Ø D [mm] | H [mm] | Weight [kg] | Power [Watt] | Breakaway force [daN] j | Load capacity [daN] k |
| 536-4 | 40 | 65 | 0,6 | 8,5 | 50 | 25 |
| 536-5 | 50 | 65 | 0,9 | 9,5 | 100 | 50 |
| 536-6.3 | 63 | 65 | 1,3 | 13 | 180 | 90 |
| 536-8 | 80 | 65 | 2,1 | 18 | 300 | 150 |
| 536-10 | 100 | 65 | 3,4 | 22 | 480 | 240 |
| 536-15 | 150 | 65 | 7,6 | 44 | 800 | 400 |
| 536-18 | 180 | 80 | 14,5 | 66 | 1500 | 750 |
| 536-25 | 250 | 100 | 34 | 165 | 3000 | 1500 |
| 536-30 | 300 | 110 | 55 | 220 | 3600 | 1800 |
j measured according to EN13155, with air gap = 0 mm
k calculated with 2-fold safety from the breakaway force at operating temperature
Wagner
Pluspoints
At a glance
- Customised design - individual adaptation to the application
- Wagner-Plus after-sales service
- Maintenance-free
- Assembly concept - optimisation for maintenance
- LongLife Repair - Plus
- Extreme robustness - structure & connections
Compatible products
Optional extensions
SERIES 744
Control-Unit 744
Electronic-Pole-Reversal-Control-Unit 755Compact and very versatile, for magnets of all kinds.SERIES 756
Electronic-Pole-Reversal-Control-Unit 756Magnetisation and polarity reversal of electro and electro-permanent magnets.
Control-Unit 744Used for switching all electric and electro-permanent solenoids from Wagner.
SERIES 755Electronic-Pole-Reversal-Control-Unit 755Compact and very versatile, for magnets of all kinds.SERIES 756Electronic-Pole-Reversal-Control-Unit 756Magnetisation and polarity reversal of electro and electro-permanent magnets. 
