Wagner Magnete
Industry solutions   /   Electro-Permanent-Lifting-Magnet 5190N

Electro-Permanent-Lifting-Magnet 5190N

Electro-Permanent-Lifting-Magnets 5190N are used wherever ferromagnetic parts need to be lifted and transported safely.
 
The integrated bipolar double magnet system not only achieves high load-bearing forces with a low magnet weight for transporting flat or cubic parts, but can also safely pick up round parts such as shafts and pipes with easy-to-fit prism-shaped pole shoes.
 
The narrow design also allows individual, bar-shaped parts to be gripped up to the outermost edge of a stack of parts, which largely eliminates the need for gaps between the parts in the stack. For large or very long workpieces, it is possible to use several magnets on one traverse.
 
The ferromagnetic parts are clamped and released from the electro-permanent lifting magnet with a short current pulse that activates or deactivates the permanent magnet system. This pulse control ensures low energy consumption with minimal self-heating.
 
The workpieces are held by the built-in permanent magnet system without any additional power supply. A high-maintenance battery system, as with the use of electric magnets, is therefore not necessary. In the event of a power failure, the magnet retains its holding force - workpieces do not fall off!
 
With the corresponding pole-reversal control units (USG) from Wagner Magnete, the electro-permanent lifting magnets can be controlled reliably and quickly. The magnetisation process is monitored each time the solenoid is switched on. This ensures optimum operational safety, even in the event of a power failure. Depending on the version, up to 16 holding force levels are available, e.g. to pick up even very thin parts individually. Several demagnetising programmes ensure fast and precise release. The pole reversal control unit can be controlled either via a PLC or via a separate control unit as well as via buttons directly on the lifting magnet.

Hold & transport - Features

Adhesive force Super strong maximum holding force (with neodymium)Super strong maximum holding force (with neodymium)
Hold & transport - Features
Einsatzgebiete Automated transport, Automated handling, Handling, Crane transport
Control system Pole reversal control unit
Adhesive force Super strong maximum holding force (with neodymium)
Holding force control Multi-stage adhesive forces
Magnet design Electro-permanent magnet (neodymium)
Areas of application Gripping systems, Handling, Crane systems
Ausführungsoptionen Anchor Points, Suspension-Brackets, Grab Handle with Control-Panel, Chain Suspension, Pole-extension with prismatic design

Downloads

Detailierte Angaben zu den Hold & transport - Features finden Sie in den Datenblättern.

Um den Download zu starten, wählen Sie bitte eine Datei aus.
Electro-permanent lifting magnet 5190N

Ausführungsoptionen

SERIES 5190N

Anchor Points
Suspension-Brackets
Grab Handle with Control-Panel
Chain Suspension
Pole-extension with prismatic design

The Highlights

SERIES 5190N

  • Integrated bipolar double magnet system
  • Full magnetic force even in the event of a power failure
  • Power consumption only for short pulse
  • Load capacity specifications with 3-fold safety according to EN13155 compared to the breakaway force
  • Handle with push-button enables safe guidance of the load with simultaneous operation of the control directly on the magnet
  • Cylindrical parts can be transported with the aid of prismatic pole shoes
  • Long service life thanks to exchangeable, bolted suspension eyes

Technical data

SERIES 5190N

  • 1
  • 2
Type Width b [mm] Length a [mm] Height c [mm] Weight approx. [kg] Breakaway force [daN] j Load capacity [daN] k with air gap [mm] l
5190N-6/15 60 150 120 7 720 180 0,2
5190N-6/19 60 190 120 9 900 230 0,2
5190N-6/22.5 60 225 120 10,5 1095 275 0,2
5190N-6/26 60 260 120 12 1170 270 0,2
5190N-6/30 60 300 120 14 1470 370 0,2
5190N-6/34 60 340 120 16 1710 430 0,2
5190N-6/38 60 380 120 17 1950 460 0,2
5190N-6/42 60 420 120 18 2010 490 0,2
5190N-6/46 60 460 120 21 2100 520 0,2
5190N-6/50 60 500 120 22 2400 600 0,2
5190N-10/20 100 200 140 19 1620 420 0,3
5190N-10/25 100 250 140 22 1950 520 0,3
5190N-10/30 100 300 140 28 2400 610 0,3
5190N-10/35 100 350 140 33 2880 750 0,3
5190N-10/40 100 400 140 36 3180 800 0,3
5190N-10/45 100 450 140 41 3600 940 0,3
5190N-10/50 100 500 140 44 4200 1100 0,3
5190N-20/50 200 500 255 180 7800 2100 0,5
5190N-20/60 200 600 255 202 9600 2600 0,5
5190N-20/80 200 800 255 280 13500 3800 0,5
5190N-20/100 200 1000 255 336 17100 4900 0,5
 

j measured according to EN13155, with air gap = 0 mm

k calculated with 3-fold safety from the pull-off force in relation to the air gap specification

l approx. width magnet / 300 according to EN13155 for load capacity design

Wagner
Pluspoints

At a glance

  • Customised design - individual adaptation to the application
  • Wagner-Plus after-sales service
  • Maintenance-free
  • Assembly concept - optimisation for maintenance
  • LongLife Repair - Plus
  • Extreme robustness - structure & connections

The special is
standard with us

Take advantage of our experience and expertise to optimise your systems with
optimise your systems with state-of-the-art magnet systems.
QUALITY - MADE IN GERMANY
FOR THE WHOLE WORLD
Our international contact person
Wagner Magnete GmbH & Co. KG info@wagner-magnete.de
+49 (0) 83 35 / 980 0
NBM AB NBM AB
info@nbm-ab.se
+46 70 82 33 752
Geha Laverman b.v. Erik Bloot
e.bloot@geha-laverman.com
+31 (0)6 511 184 85
Geha Laverman b.v. Erik Bloot
e.bloot@geha-laverman.com
+31 (0)6 511 184 85
Binder Magnete Ibérica, S.L. Khaled Chamari
chamari@binder-es.com
+34 699 45 11 77
Arad commercial engineering company Mojtaba Fathi
info@ace-co.org
+9821 664 60 178 & +9821 664 60 180
Kilkenny Mechanical Handling Systems Ltd. Kilkenny Mechanical Handling Systems Ltd.
info@kmhsys.com
+353 56 7708844
Kiepe Electric S.p.A S.p.A Kiepe Electric
info@kiepeelectric.com
+ 39 02 927281
PGT Procurement Global Trading Mohammad Maysam
info@PGT-co.com
+968 912 600 49
Dalian NAQI International Trade Co., Ltd Dalian NAQI
info@dlnaqi.com
Cemac Technologies Eric Paulsen
eric.paulsen@cemactech.com
+61 (0)455 920 888
GAMA Communication & Engineering Ltd. Arie Pollak
arie-pollak@actcom.co.il
+972 (0) 3 6130 666
Minco Malvern Process Equipment Co. Shanker Ramaswamy
sr@mmpe.co.in
+91 9980118340
ALDRA CARA COM SRL Ionut Ripa
ionut.ripa@remcar.ro
+40 (0) 73 664 88 76
SIAG Industrieanlagen Umwelttechnik Herr Seidnitzer
office@siag-tech.at
+43 31 12 / 68 50 - 0
Türkiye Genel Temsilciliði Gürkan Sever
info@gurkansever.com
+ 90 536 213 34 10
O.R.S.I. SRL O.R.S.I. SRL
orsisrl@orsitortona.it
+39 0131 861016
HUT Technika Środowiska Sp. z o.o. HUT Technika Środowiska Sp. z o.o.
hut@hut.net.pl
+48 68 451 76 76
Mining Technologies LLC Vitaly Vizir
v.vizir@gor-teh.ru
+7 (961) 81 195 00
Malvern Engineering Works (Pty) Ltd Peter Wilson
info@malvern.co.za
+27 11 873 9010
All contact partners at a glance
Contact data
Wagner Magnete GmbH & Co. KG

Clamping and environmental technology
Obere Str. 15
87751 Heimertingen

Phone +49 (0) 83 35 / 980 0
Fax +49 (0) 83 35 / 980 270

Internet www.wagner-magnete.de
E-Mail info@wagner-magnete.de
Regional offices
Germany West

Erik Möser
Mobil +49 (0) 171 970 49 56
erik.moeser@wagner-magnete.de

Germany North

Jens-Henning Tewes
Mobil +49 (0) 171 78 76 761
tewes@tiaf.de

International
Sweden
Magnetic separators and magnetic clamping technology

NBM AB

NBM AB

Eskilsvägen 34

617 30 Skärblacka

Phone: +46 70 82 33 752
info@nbm-ab.se
www.nbm-ab.se
Belgium
Magnetic separators and metal detectors

Geha Laverman b.v.

Erik Bloot

Distributieweg 31

2404 CM Alphen aan den Rijn

Mobil: +31 (0)6 511 184 85
Phone: +31 (0)172 475 153
Fax: +31 (0)172 476 504
e.bloot@geha-laverman.com
www.geha-laverman.com
Netherlands
Magnetic separators and metal detectors

Geha Laverman b.v.

Erik Bloot

Distributieweg 31

2404 CM Alphen aan den Rijn

Mobil: +31 (0)6 511 184 85
Phone: +31 (0)172 475 153
Fax: +31 (0)172 476 504
e.bloot@geha-laverman.com
www.geha-laverman.com
Spain
Magnetic separators and magnetic clamping technology

Binder Magnete Ibérica, S.L.

Khaled Chamari

C/ Coure 31-Pol. Ind. Riu Clar

E-43006 Tarragona

Mobil: +34 699 45 11 77
Phone: +34 977 20 69 37
Fax: +34 977 20 69 38
chamari@binder-es.com
www.binder-es.com
Iran
Magnetic separators and metal detectors

Arad commercial engineering company

Mojtaba Fathi

No5 Asgari Ave Felestin St Felestin Sq.

Theran

Phone: +9821 664 60 178 & +9821 664 60 180
info@ace-co.org
Ireland
Magnetic separators and metal detectors

Kilkenny Mechanical Handling Systems Ltd.

Kilkenny Mechanical Handling Systems Ltd.

Industrial Estate, Castletobin, Callan, Co. Kilkenny

R95 D237 Kilkenny

Phone: +353 56 7708844
info@kmhsys.com
www.kmhsys.com
Italy
MAGNETIC CLAMPING TECHNOLOGY

Kiepe Electric S.p.A

S.p.A Kiepe Electric

Via delle Gerole 17

I-20867 Camponago (MB)

Phone: + 39 02 927281
info@kiepeelectric.com
MAGNETIC CUTTER

O.R.S.I. SRL

O.R.S.I. SRL

Corso Alessandria, 49

I - 15057 Tortona (AL)

Phone: +39 0131 861016
Fax: +39 0131 866397
orsisrl@orsitortona.it
www.orsitortona.it
Sultanate of Oman
Magnetic separators and metal detectors

PGT Procurement Global Trading

Mohammad Maysam

Plot No 3390

321 Logistics Park Sohar Feezone

Mobil: +968 912 600 49
Phone: +968 266 43 886
info@PGT-co.com
China
Magnetic separators and magnetic clamping technology

Dalian NAQI International Trade Co., Ltd

Dalian NAQI

407 Jinxing Buiding, No.6 Huabei Road

116033 GanJingZi District, Dalian

info@dlnaqi.com
www.dlnaqi.com
Australia
Magnetic separators and metal detectors

Cemac Technologies

Eric Paulsen

39 Arbor Way (off Clifton Grove)

VIC 3201 Carrum Downs

Mobil: +61 (0)455 920 888
Phone: +61 (0)3 8400 6066
eric.paulsen@cemactech.com
www.cemactech.com
Israel
Magnetic separators and metal detectors

GAMA Communication & Engineering Ltd.

Arie Pollak

16 Menachem Begin St.

5270003 Ramat-Gan

Phone: +972 (0) 3 6130 666
Fax: +972 (0) 3 6130 675 & +972 (0) 52 233 32 63
arie-pollak@actcom.co.il
India
Magnetic separators and metal detectors

Minco Malvern Process Equipment Co.

Shanker Ramaswamy

229, 5th Main, 5th Cross Kodihalli

560 008 Bangalore

Mobil: +91 9980118340
Fax: +91 80 25274142
sr@mmpe.co.in
Romania
Magnetic separators and magnetic clamping technology

ALDRA CARA COM SRL

Ionut Ripa

Str. Bazaltului, nr. 7

500053 Brasov

Mobil: +40 (0) 73 664 88 76
Phone: +40 (0) 268 334 330
ionut.ripa@remcar.ro
office@remcar.ro
www.aldra.ro
Austria
Magnetic separators and metal detectors

SIAG Industrieanlagen Umwelttechnik

Herr Seidnitzer

Ludersdorf 148

8200 Gleisdorf

Phone: +43 31 12 / 68 50 - 0
Fax: +43 31 12 / 68 50 - 18
office@siag-tech.at
www.siag-tech.at
Turkey
Magnetic separators and metal detectors

Türkiye Genel Temsilciliði

Gürkan Sever

157 Sok. No:11

7 35390 Buca - İzmir

Mobil: + 90 536 213 34 10
Phone: + 90 232 442 41 30
info@gurkansever.com
www.gurkansever.com
Poland
MAGNETIC SEPARATORS AND METAL DETECTORS

HUT Technika Środowiska Sp. z o.o.

HUT Technika Środowiska Sp. z o.o.

ul. Batorego 126A

65-001 Zielona Góra

Phone: +48 68 451 76 76
Fax: +48 68 451 76 77
hut@hut.net.pl
www.hut.net.pl
Russia
Magnetic separators and metal detectors

Mining Technologies LLC

Vitaly Vizir

Listvennaya str., build 20, str.1, office 5-H

194214 Saint-Petersburg

Mobil: +7 (961) 81 195 00
Phone: +7 (812) 70 210 07
v.vizir@gor-teh.ru
www.gor-teh.ru
South Africa
Magnetic separators and metal detectors

Malvern Engineering Works (Pty) Ltd

Peter Wilson

Raceway Industrial Park

Germiston

Phone: +27 11 873 9010
Fax: +27 11 873 9596
info@malvern.co.za
www.malvern.co.za