Electro-Magnet-Clamping-Plate 112
with cross-pole pitch
The internal polarity change of this magnet system corresponds exactly to the distribution of the poles on the clamping surface. This ensures an even distribution of the holding force over the entire clamping surface.
This pole division also allows you to clamp workpieces on the long sides of the pole plates.
This pole division also allows you to clamp workpieces on the long sides of the pole plates.
Structure:
Electro-magnetic clamping plates essentially consist of three components: a solid steel base, a copper winding and a pole plate.
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress. A decisive quality feature of our pole plates is the optimum balance between electrical power consumption and achievable magnetic force.
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress. A decisive quality feature of our pole plates is the optimum balance between electrical power consumption and achievable magnetic force.
In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before the processing limit is reached. The pole plate can be easily replaced, which increases the service life of the clamping plate. The pole plate can be customised to your requirements at any time. Possible options include additional threaded holes, T-slots, profiles, etc.
Functional principle
Electro-magnetic clamping systems essentially consist of three components:
- a solid steel base
- a copper winding
- a pole plate
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before the wear limit is reached. The pole plate can be easily replaced, which considerably increases the service life of the entire chuck.
Magneteigenschaften
| Magneteigenschaften | |
|---|---|
| Einsatzgebiete | Grinding processing |
| Pole pitch | Cross pole pitch |
| Pole distance | 9, 13, 18, 25 |
| Processing type | Multi-page processing |
| Control system | Pole reversal control unit |
| Holding force control | Multi-stage adhesive forces |
| Magnet design | Electro-magnet |
| Design | Square |
| Areas of application | Machine tools |
| Ausführungsoptionen | Mechanical Stop-Rails, Pole-Plates, Air Purge Holes, Pass-through Holes, Inserts, Threaded holes, Customized Solution, Magnetic Area profiled, Paintwork in special Design |
| Scope of delivery |
|
Downloads
Detailierte Angaben zu den Magneteigenschaften finden Sie in den Datenblättern.Um den Download zu starten, wählen Sie bitte eine Datei aus. Electromagnetic clamping plates series 112, 113, 115, 117
The Highlights
SERIES 112
- Adjustable clamping force prevents uneven workpieces from being clamped through
- No deformation of the workpieces thanks to finely adjustable clamping force
- Solenoid duty cycle 100%
- Protection class IP 67
- Customised sizes also in XXXL
- Homogeneous temperature distribution and heat dissipation across the entire clamping surface
- Inserts in the pole surface enable the clamping of profiled workpieces
- Sustainability thanks to the ability to replace worn pole plates when continuing to use the magnet system
Technical data
SERIES 112
1
| Size | Clamping surface a x b [mm] | Height c [mm] | Pole spacing p [mm] | Power [Watt] | Weight [kg] |
| 112-10/20 | 102x202 | 80 | 13 | 19 | 11 |
| 112-10/25 | 102x252 | 80 | 13 | 24 | 14 |
| 112-10/30 | 102x302 | 80 | 13 | 31 | 17 |
| 112-15/30 | 152x302 | 80 | 13 | 42 | 25 |
| 112-15/40 | 152x402 | 80 | 13 | 52 | 34 |
| 112-15/45 | 152x452 | 80 | 13 | 59 | 38 |
| 112-15/60 | 152x602 | 80 | 13 | 75 | 50 |
| 112-17,5/45 | 177x452 | 80 | 18 | 64 | 44 |
| 112-20/40 | 202x402 | 80 | 18 | 66 | 45 |
| 112-20/50 | 202x502 | 80 | 18 | 83 | 56 |
| 112-20/60 | 202x602 | 80 | 18 | 89 | 67 |
| 112-20/80 | 202x802 | 80 | 18 | 120 | 90 |
| 112-20/100 | 202x1002 | 80 | 18 | 154 | 112 |
| 112-25/50 | 252x502 | 80 | 18 | 94 | 70 |
| 112-25/60 | 252x602 | 80 | 18 | 109 | 84 |
| 112-25/80 | 252x802 | 80 | 18 | 127 | 112 |
| 112-25/100 | 252x1002 | 80 | 18 | 175 | 140 |
| 112-30/50 | 302x502 | 80 | 25 | 110 | 84 |
| 112-30/60 | 302x602 | 80 | 25 | 128 | 101 |
| 112-30/80 | 302x802 | 80 | 25 | 171 | 134 |
| 112-30/100 | 302x1002 | 80 | 25 | 209 | 168 |
| 112-30/120 | 302x1202 | 80 | 25 | 237 | 202 |
| 112-30/150 | 302x1502 | 80 | 25 | 315 | 252 |
| 112-35/60 | 352x602 | 80 | 25 | 148 | 118 |
| 112-35/80 | 352x802 | 80 | 25 | 191 | 157 |
| 112-35/100 | 352x1002 | 80 | 25 | 239 | 196 |
| 112-35/120 | 352x1202 | 80 | 25 | 262 | 235 |
| 112-35/150 | 352x1502 | 80 | 25 | 323 | 294 |
| 112-40/60 | 402x602 | 80 | 25 | 166 | 134 |
| 112-40/80 | 402x802 | 80 | 25 | 208 | 179 |
| 112-40/100 | 402x1002 | 80 | 25 | 255 | 224 |
| 112-40/120 | 402x1202 | 80 | 25 | 329 | 269 |
| 112-40/150 | 402x1502 | 80 | 25 | 396 | 336 |
| 112-40/200 | 402x2002 | 80 | 25 | 461 | 448 |
Other dimensions are available on request.
Wagner
Pluspoints
At a glance
- Customised design
- Original WAGNER control technology
- Sustainable through energy recovery
- WAGNER assembly concept
- LongLife - REPAIR PLUS
- AfterSalesService - WAGNER-PLUS
- Test set-up can be booked at the WAGNER-TECHNIKUM
Compatible products
Optional extensions
SERIES 744
Control-Unit 744
Electronic-Pole-Reversal-Control-Unit 755Compact and very versatile, for magnets of all kinds.SERIES 756
Electronic-Pole-Reversal-Control-Unit 756Magnetisation and polarity reversal of electro and electro-permanent magnets.SERIES 757
Electronic-Pole-Reversal-Control-Unit 757Adjustable current or voltage source for magnetisation and polarity reversal.Software
Monitoring-Program USGExtension of the configuration options for pole-reversal control units.
Control-Unit 744Used for switching all electric and electro-permanent solenoids from Wagner.
SERIES 755Electronic-Pole-Reversal-Control-Unit 755Compact and very versatile, for magnets of all kinds.SERIES 756Electronic-Pole-Reversal-Control-Unit 756Magnetisation and polarity reversal of electro and electro-permanent magnets.SERIES 757Electronic-Pole-Reversal-Control-Unit 757Adjustable current or voltage source for magnetisation and polarity reversal.SoftwareMonitoring-Program USGExtension of the configuration options for pole-reversal control units. 
