Electro-Magnet-Clamping-Chuck 125
with pendulum pole pitch
This special type of pole pitch offers you a distribution of north and south poles over the entire clamping surface in both longitudinal and transverse directions.
In many cases, this allows you to achieve a considerable increase in holding force compared to other forms of pole pitch.
It is the only chuck with which you can clamp right into the centre.
In many cases, this allows you to achieve a considerable increase in holding force compared to other forms of pole pitch.
It is the only chuck with which you can clamp right into the centre.
Structure:
Electro-magnetic chucks essentially consist of three components: a solid steel base, a copper winding and a pole plate. The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress. A key quality feature of our chucks is the optimum balance between electrical power consumption and achievable magnetic force. In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before reaching its working limit. The pole plate can be easily replaced, which increases the service life of the entire chuck. The pole plate can be customised to your requirements at any time. Possible options include additional threaded holes, T-slots, profiles, etc.
Functional principle
Electro-magnetic clamping systems essentially consist of three components:
- a solid steel base
- a copper winding
- a pole plate
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before the wear limit is reached. The pole plate can be easily replaced, which considerably increases the service life of the entire chuck.
Magneteigenschaften
| Magneteigenschaften | |
|---|---|
| Einsatzgebiete | Grinding processing |
| Pole pitch | Pendulum pole pitch |
| Pole distance | 11, 14, 18, 25 |
| Processing type | Multi-page processing |
| Control system | Pole reversal control unit |
| Holding force control | Multi-stage adhesive forces |
| Magnet design | Electro-magnet |
| Design | Round |
| Areas of application | Machine tools |
| Ausführungsoptionen | Air Purge Holes, Pass-through Holes, Inserts, Adaptation Flange, Threaded holes, Customized Solution, Current-Transmission via Slip-Ring-Unit and Carbon-Brushes, Centering Inserts |
Downloads
Detailierte Angaben zu den Magneteigenschaften finden Sie in den Datenblättern.Um den Download zu starten, wählen Sie bitte eine Datei aus. Electromagnetic chucks series 121, 123, 125
The Highlights
SERIES 125
- 100% duty cycle
- Clamping to the centre
- Standard protection class IP 67 (except electrical connection)
- Best price-performance ratio
Technical data
SERIES 125
1
2
| Type | Pole spacing p [mm] | a [mm] | b [mm] | c [mm] | d [mm] | e [mm] | f [thread] | g [mm] | Power [Watt] | Weight [kg] |
| 125-30 | 11-14-18 | 300 | 95 | 160 | 3 | 190 | 4xM12 | 16 | 80 | 47 |
| 125-40 | 11-14-18 | 400 | 95 | 210 | 4 | 250 | 6xM12 | 16 | 130 | 84 |
| 125-50 | 11-14-18 | 500 | 95 | 280 | 4 | 320 | 6xM12 | 16 | 190 | 131 |
| 125-60 | 11-14-18 | 600 | 100 | 350 | 4 | 390 | 6xM16 | 18 | 265 | 198 |
| 125-70 | 11-14-18 | 700 | 100 | 400 | 4 | 450 | 6xM16 | 18 | 350 | 269 |
| 125-80 | 14-18-25 | 800 | 100 | 450 | 4 | 500 | 6xM16 | 18 | 440 | 352 |
| 125-90 | 14-18-25 | 900 | 100 | 500 | 4 | 560 | 6xM16 | 18 | 545 | 445 |
| 125-100 | 14-18-25 | 1000 | 100 | 550 | 4 | 620 | 6xM16 | 18 | 660 | 550 |
| 125-110 | 14-18-25 | 1100 | 100 | Back by arrangement | 22 | 780 | 665 | |||
| 125-120 | 14-18-25 | 1200 | 100 | Back by arrangement | 22 | 920 | 791 | |||
| 125-140 | 14-18-25 | 1400 | 100 | Back by arrangement | 22 | 1230 | 1077 | |||
| 125-160 | 14-18-25 | 1600 | 125 | Back by arrangement | 22 | 1580 | 1758 | |||
Other dimensions are available on request.
Wagner
Pluspoints
At a glance
- Customised design
- Original WAGNER control technology
- Sustainable through energy recovery
- WAGNER assembly concept
- LongLife - REPAIR PLUS
- AfterSalesService - WAGNER-PLUS
- Test set-up can be booked at the WAGNER-TECHNIKUM
Compatible products
Optional extensions
SERIES 744
Control-Unit 744
Electronic-Pole-Reversal-Control-Unit 755Compact and very versatile, for magnets of all kinds.SERIES 756
Electronic-Pole-Reversal-Control-Unit 756Magnetisation and polarity reversal of electro and electro-permanent magnets.SERIES 757
Electronic-Pole-Reversal-Control-Unit 757Adjustable current or voltage source for magnetisation and polarity reversal.Software
Monitoring-Program USGExtension of the configuration options for pole-reversal control units.
Control-Unit 744Used for switching all electric and electro-permanent solenoids from Wagner.
SERIES 755Electronic-Pole-Reversal-Control-Unit 755Compact and very versatile, for magnets of all kinds.SERIES 756Electronic-Pole-Reversal-Control-Unit 756Magnetisation and polarity reversal of electro and electro-permanent magnets.SERIES 757Electronic-Pole-Reversal-Control-Unit 757Adjustable current or voltage source for magnetisation and polarity reversal.SoftwareMonitoring-Program USGExtension of the configuration options for pole-reversal control units. 
