Electro-Permanent-Magnet-Clamping-Chuck 0121
with radial pole pitch
The permanent magnetic chucks with radial pole pitch are particularly suitable for the centred clamping of workpieces such as saw blades, piston rings, ball bearing rings and the like. It is also possible to provide the permanent magnetic chucks with a central through-hole or centring hole.
The permanent magnetic chucks are mechanically switchable. State-of-the-art magnetic materials and a stable design ensure maximum holding forces and maximum level accuracy on the pole plate surface. Switching on and off is carried out with stable switching levers. In relation to the high magnetic force, only low switching forces are required. The magnetic systems do not require any maintenance. If the surface of the pole plate has become uneven after prolonged use, it can be levelled again by fine reworking. As a result, the full adhesive force and accuracy of alignment are maintained.
Functional principle
Electro-magnetic clamping systems essentially consist of three components:
- a solid steel base
- a copper winding
- a pole plate
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before the wear limit is reached. The pole plate can be easily replaced, which considerably increases the service life of the entire chuck.
Magneteigenschaften
| Magneteigenschaften | |
|---|---|
| Einsatzgebiete | Turning processing, Grinding processing |
| Pole pitch | Radial pole pitch |
| Pole distance | depending on the size |
| Processing type | Multi-page processing |
| Control system | Permanent magnet - without control |
| Holding force control | Single-stage adhesive force |
| Magnet design | Permanent magnet |
| Design | Round |
| Areas of application | Machine tools |
| Ausführungsoptionen | Adaptation for Quick-Change Pallet-Systems, Pass-through Holes, Adaptation Flange, Threaded holes, Centering Inserts |
| Scope of delivery |
|
Downloads
Detailierte Angaben zu den Magneteigenschaften finden Sie in den Datenblättern.Um den Download zu starten, wählen Sie bitte eine Datei aus. Permanent magnetic chuck 0120
The Highlights
SERIES 0121
- Maintenance-free
- No effort required for electrical power transmission
- Highest level accuracy
- Low switching forces with high magnetic force
Technical data
SERIES 0121
1
2
| Type | p¹ | a [mm] | b [mm] | c [mm] | d [mm] | e [mm] | f [thread] | g [mm] |
Pole pitch
[from] - [to]
h [mm] i [mm]
|
D max. [mm]² | Weight approx. [kg] | |
| 0121-15-4 | 4 | 150 | 64 | 90 | 3 | 120 | 3 x M10 | 12 | 20 | 117 | 24 | 9 |
| 0121-20-6 | 6 | 200 | 69 | 110 | 3 | 140 | 4 x M10 | 14 | 28 | 167 | 30 | 16 |
| 0121-25-6 | 6 | 250 | 69 | 140 | 3 | 170 | 4 x M12 | 14 | 30 | 217 | 40 | 23 |
| 0121-30-8 | 8 | 300 | 69 | 160 | 3 | 190 | 4 x M12 | 14 | 40 | 267 | 50 | 36 |
| 0121-35-8 | 8 | 350 | 69 | 210 | 4 | 240 | 6 x M12 | 14 | 40 | 303 | 50 | 47 |
| 0121-40-8 | 8 | 400 | 69 | 210 | 4 | 240 | 6 x M12 | 14 | 40 | 354 | 50 | 59 |
Other dimensions are available on request.
¹ Number of pole pairs
² Max. possible diameter for hole in the centre
² Max. possible diameter for hole in the centre
Wagner
Pluspoints
At a glance
- Customised design
- Original WAGNER control technology
- Sustainable through energy recovery
- WAGNER assembly concept
- LongLife - REPAIR PLUS
- AfterSalesService - WAGNER-PLUS
- Test set-up can be booked at the WAGNER-TECHNIKUM
