Wagner Magnete
Industry solutions   /   Electro-Magnet-Clamping-Plate 112

Electro-Magnet-Clamping-Plate 112

with cross-pole pitch

The internal polarity change of this magnet system corresponds exactly to the distribution of the poles on the clamping surface. This ensures an even distribution of the holding force over the entire clamping surface.
This pole division also allows you to clamp workpieces on the long sides of the pole plates.
 
Structure:
Electro-magnetic clamping plates essentially consist of three components: a solid steel base, a copper winding and a pole plate.
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress. A decisive quality feature of our pole plates is the optimum balance between electrical power consumption and achievable magnetic force.
 
In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before the processing limit is reached. The pole plate can be easily replaced, which increases the service life of the clamping plate. The pole plate can be customised to your requirements at any time. Possible options include additional threaded holes, T-slots, profiles, etc.

Functional principle

Electro-magnetic clamping systems essentially consist of three components:
  • a solid steel base
  • a copper winding
  • a pole plate
The winding is moulded into the lower part and is therefore reliably protected against vibrations and moisture ingress.
A decisive quality feature of WAGNER clamping systems is the optimum balance between electrical power consumption and achievable magnetic force.
In practical use, the pole plate is subject to wear. It is therefore designed in such a way that it can be reworked many times before the wear limit is reached. The pole plate can be easily replaced, which considerably increases the service life of the entire chuck.

Magneteigenschaften

Einsatzgebiete Grinding processingGrinding processing
Pole pitch Cross pole pitchCross pole pitch
Processing type Multi-page processingMulti-page processing
Design SquareSquare
Magneteigenschaften
Einsatzgebiete Grinding processing
Pole pitch Cross pole pitch
Pole distance 9, 13, 18, 25
Processing type Multi-page processing
Control system Pole reversal control unit
Holding force control Multi-stage adhesive forces
Magnet design Electro-magnet
Design Square
Areas of application Machine tools
Ausführungsoptionen Mechanical Stop-Rails, Pole-Plates, Air Purge Holes, Pass-through Holes, Inserts, Threaded holes, Customized Solution, Magnetic Area profiled, Paintwork in special Design
Scope of delivery
  • Stop bar on the front
  • Connection cable
  • Clamping slots or fixing holes

Downloads

Detailierte Angaben zu den Magneteigenschaften finden Sie in den Datenblättern.

Um den Download zu starten, wählen Sie bitte eine Datei aus.
Electromagnetic clamping plates series 112, 113, 115, 117

Ausführungsoptionen

SERIES 112

Mechanical Stop-Rails
Pole-Plates
Air Purge Holes
Pass-through Holes
Inserts
Threaded holes
Customized Solution
Magnetic Area profiled
Paintwork in special Design

The Highlights

SERIES 112

  • Adjustable clamping force prevents uneven workpieces from being clamped through
  • No deformation of the workpieces thanks to finely adjustable clamping force
  • Solenoid duty cycle 100%
  • Protection class IP 67
  • Customised sizes also in XXXL
  • Homogeneous temperature distribution and heat dissipation across the entire clamping surface
  • Inserts in the pole surface enable the clamping of profiled workpieces
  • Sustainability thanks to the ability to replace worn pole plates when continuing to use the magnet system

Technical data

SERIES 112

  • 1
Size Clamping surface a x b [mm] Height c [mm] Pole spacing p [mm] Power [Watt] Weight [kg]
112-10/20 102x202 80 13 19 11
112-10/25 102x252 80 13 24 14
112-10/30 102x302 80 13 31 17
112-15/30 152x302 80 13 42 25
112-15/40 152x402 80 13 52 34
112-15/45 152x452 80 13 59 38
112-15/60 152x602 80 13 75 50
112-17,5/45 177x452 80 18 64 44
112-20/40 202x402 80 18 66 45
112-20/50 202x502 80 18 83 56
112-20/60 202x602 80 18 89 67
112-20/80 202x802 80 18 120 90
112-20/100 202x1002 80 18 154 112
112-25/50 252x502 80 18 94 70
112-25/60 252x602 80 18 109 84
112-25/80 252x802 80 18 127 112
112-25/100 252x1002 80 18 175 140
112-30/50 302x502 80 25 110 84
112-30/60 302x602 80 25 128 101
112-30/80 302x802 80 25 171 134
112-30/100 302x1002 80 25 209 168
112-30/120 302x1202 80 25 237 202
112-30/150 302x1502 80 25 315 252
112-35/60 352x602 80 25 148 118
112-35/80 352x802 80 25 191 157
112-35/100 352x1002 80 25 239 196
112-35/120 352x1202 80 25 262 235
112-35/150 352x1502 80 25 323 294
112-40/60 402x602 80 25 166 134
112-40/80 402x802 80 25 208 179
112-40/100 402x1002 80 25 255 224
112-40/120 402x1202 80 25 329 269
112-40/150 402x1502 80 25 396 336
112-40/200 402x2002 80 25 461 448
 
Other dimensions are available on request.

Wagner
Pluspoints

At a glance

  • Customised design
  • Original WAGNER control technology
  • Sustainable through energy recovery
  • WAGNER assembly concept
  • LongLife - REPAIR PLUS
  • AfterSalesService - WAGNER-PLUS
  • Test set-up can be booked at the WAGNER-TECHNIKUM

The special is
standard with us

Take advantage of our experience and expertise to optimise your systems with
optimise your systems with state-of-the-art magnet systems.
QUALITY - MADE IN GERMANY
FOR THE WHOLE WORLD
Our international contact person
Wagner Magnete GmbH & Co. KG info@wagner-magnete.de
+49 (0) 83 35 / 980 0
NBM AB NBM AB
info@nbm-ab.se
+46 70 82 33 752
Geha Laverman b.v. Erik Bloot
e.bloot@geha-laverman.com
+31 (0)6 511 184 85
Geha Laverman b.v. Erik Bloot
e.bloot@geha-laverman.com
+31 (0)6 511 184 85
Binder Magnete Ibérica, S.L. Khaled Chamari
chamari@binder-es.com
+34 699 45 11 77
Arad commercial engineering company Mojtaba Fathi
info@ace-co.org
+9821 664 60 178 & +9821 664 60 180
Kilkenny Mechanical Handling Systems Ltd. Kilkenny Mechanical Handling Systems Ltd.
info@kmhsys.com
+353 56 7708844
Kiepe Electric S.p.A S.p.A Kiepe Electric
info@kiepeelectric.com
+ 39 02 927281
PGT Procurement Global Trading Mohammad Maysam
info@PGT-co.com
+968 912 600 49
Dalian NAQI International Trade Co., Ltd Dalian NAQI
info@dlnaqi.com
Cemac Technologies Eric Paulsen
eric.paulsen@cemactech.com
+61 (0)455 920 888
GAMA Communication & Engineering Ltd. Arie Pollak
arie-pollak@actcom.co.il
+972 (0) 3 6130 666
Minco Malvern Process Equipment Co. Shanker Ramaswamy
sr@mmpe.co.in
+91 9980118340
ALDRA CARA COM SRL Ionut Ripa
ionut.ripa@remcar.ro
+40 (0) 73 664 88 76
SIAG Industrieanlagen Umwelttechnik Herr Seidnitzer
office@siag-tech.at
+43 31 12 / 68 50 - 0
Türkiye Genel Temsilciliði Gürkan Sever
info@gurkansever.com
+ 90 536 213 34 10
O.R.S.I. SRL O.R.S.I. SRL
orsisrl@orsitortona.it
+39 0131 861016
HUT Technika Środowiska Sp. z o.o. HUT Technika Środowiska Sp. z o.o.
hut@hut.net.pl
+48 68 451 76 76
Mining Technologies LLC Vitaly Vizir
v.vizir@gor-teh.ru
+7 (961) 81 195 00
Malvern Engineering Works (Pty) Ltd Peter Wilson
info@malvern.co.za
+27 11 873 9010
All contact partners at a glance
Contact data
Wagner Magnete GmbH & Co. KG

Clamping and environmental technology
Obere Str. 15
87751 Heimertingen

Phone +49 (0) 83 35 / 980 0
Fax +49 (0) 83 35 / 980 270

Internet www.wagner-magnete.de
E-Mail info@wagner-magnete.de
Regional offices
Germany West

Erik Möser
Mobil +49 (0) 171 970 49 56
erik.moeser@wagner-magnete.de

Germany North

Jens-Henning Tewes
Mobil +49 (0) 171 78 76 761
tewes@tiaf.de

International
Sweden
Magnetic separators and magnetic clamping technology

NBM AB

NBM AB

Eskilsvägen 34

617 30 Skärblacka

Phone: +46 70 82 33 752
info@nbm-ab.se
www.nbm-ab.se
Belgium
Magnetic separators and metal detectors

Geha Laverman b.v.

Erik Bloot

Distributieweg 31

2404 CM Alphen aan den Rijn

Mobil: +31 (0)6 511 184 85
Phone: +31 (0)172 475 153
Fax: +31 (0)172 476 504
e.bloot@geha-laverman.com
www.geha-laverman.com
Netherlands
Magnetic separators and metal detectors

Geha Laverman b.v.

Erik Bloot

Distributieweg 31

2404 CM Alphen aan den Rijn

Mobil: +31 (0)6 511 184 85
Phone: +31 (0)172 475 153
Fax: +31 (0)172 476 504
e.bloot@geha-laverman.com
www.geha-laverman.com
Spain
Magnetic separators and magnetic clamping technology

Binder Magnete Ibérica, S.L.

Khaled Chamari

C/ Coure 31-Pol. Ind. Riu Clar

E-43006 Tarragona

Mobil: +34 699 45 11 77
Phone: +34 977 20 69 37
Fax: +34 977 20 69 38
chamari@binder-es.com
www.binder-es.com
Iran
Magnetic separators and metal detectors

Arad commercial engineering company

Mojtaba Fathi

No5 Asgari Ave Felestin St Felestin Sq.

Theran

Phone: +9821 664 60 178 & +9821 664 60 180
info@ace-co.org
Ireland
Magnetic separators and metal detectors

Kilkenny Mechanical Handling Systems Ltd.

Kilkenny Mechanical Handling Systems Ltd.

Industrial Estate, Castletobin, Callan, Co. Kilkenny

R95 D237 Kilkenny

Phone: +353 56 7708844
info@kmhsys.com
www.kmhsys.com
Italy
MAGNETIC CLAMPING TECHNOLOGY

Kiepe Electric S.p.A

S.p.A Kiepe Electric

Via delle Gerole 17

I-20867 Camponago (MB)

Phone: + 39 02 927281
info@kiepeelectric.com
MAGNETIC CUTTER

O.R.S.I. SRL

O.R.S.I. SRL

Corso Alessandria, 49

I - 15057 Tortona (AL)

Phone: +39 0131 861016
Fax: +39 0131 866397
orsisrl@orsitortona.it
www.orsitortona.it
Sultanate of Oman
Magnetic separators and metal detectors

PGT Procurement Global Trading

Mohammad Maysam

Plot No 3390

321 Logistics Park Sohar Feezone

Mobil: +968 912 600 49
Phone: +968 266 43 886
info@PGT-co.com
China
Magnetic separators and magnetic clamping technology

Dalian NAQI International Trade Co., Ltd

Dalian NAQI

407 Jinxing Buiding, No.6 Huabei Road

116033 GanJingZi District, Dalian

info@dlnaqi.com
www.dlnaqi.com
Australia
Magnetic separators and metal detectors

Cemac Technologies

Eric Paulsen

39 Arbor Way (off Clifton Grove)

VIC 3201 Carrum Downs

Mobil: +61 (0)455 920 888
Phone: +61 (0)3 8400 6066
eric.paulsen@cemactech.com
www.cemactech.com
Israel
Magnetic separators and metal detectors

GAMA Communication & Engineering Ltd.

Arie Pollak

16 Menachem Begin St.

5270003 Ramat-Gan

Phone: +972 (0) 3 6130 666
Fax: +972 (0) 3 6130 675 & +972 (0) 52 233 32 63
arie-pollak@actcom.co.il
India
Magnetic separators and metal detectors

Minco Malvern Process Equipment Co.

Shanker Ramaswamy

229, 5th Main, 5th Cross Kodihalli

560 008 Bangalore

Mobil: +91 9980118340
Fax: +91 80 25274142
sr@mmpe.co.in
Romania
Magnetic separators and magnetic clamping technology

ALDRA CARA COM SRL

Ionut Ripa

Str. Bazaltului, nr. 7

500053 Brasov

Mobil: +40 (0) 73 664 88 76
Phone: +40 (0) 268 334 330
ionut.ripa@remcar.ro
office@remcar.ro
www.aldra.ro
Austria
Magnetic separators and metal detectors

SIAG Industrieanlagen Umwelttechnik

Herr Seidnitzer

Ludersdorf 148

8200 Gleisdorf

Phone: +43 31 12 / 68 50 - 0
Fax: +43 31 12 / 68 50 - 18
office@siag-tech.at
www.siag-tech.at
Turkey
Magnetic separators and metal detectors

Türkiye Genel Temsilciliði

Gürkan Sever

157 Sok. No:11

7 35390 Buca - İzmir

Mobil: + 90 536 213 34 10
Phone: + 90 232 442 41 30
info@gurkansever.com
www.gurkansever.com
Poland
MAGNETIC SEPARATORS AND METAL DETECTORS

HUT Technika Środowiska Sp. z o.o.

HUT Technika Środowiska Sp. z o.o.

ul. Batorego 126A

65-001 Zielona Góra

Phone: +48 68 451 76 76
Fax: +48 68 451 76 77
hut@hut.net.pl
www.hut.net.pl
Russia
Magnetic separators and metal detectors

Mining Technologies LLC

Vitaly Vizir

Listvennaya str., build 20, str.1, office 5-H

194214 Saint-Petersburg

Mobil: +7 (961) 81 195 00
Phone: +7 (812) 70 210 07
v.vizir@gor-teh.ru
www.gor-teh.ru
South Africa
Magnetic separators and metal detectors

Malvern Engineering Works (Pty) Ltd

Peter Wilson

Raceway Industrial Park

Germiston

Phone: +27 11 873 9010
Fax: +27 11 873 9596
info@malvern.co.za
www.malvern.co.za